Page Comparison

SIO Printing Services

sioprint.ucsd.edu hosts shared printing for each department. Authentication is required for printing. All print jobs are logged for accounting purposes.

Below you will find instructions to adding the printer to your computer*.

Mac OS X Instructions

Microsoft Windows Instructions

If you have troubles with printing, please contact the Scripps IT Help Desk: siohelp@ucsd.edu

The following is a list of supported printers and locations.

Anchor

	printer_table
	printer_table

Printer Name	Printer Location	Printer Make/Model
siohubbs4	Hubbs 4th floor	Xerox ColorQube 8580DN
hlabtek	Hydraulics Laboratory room 201	Xerox ColorQube 8570DN
cissvh1	Sverdrup 1st floor room 1263	Xerox ColorQube 8570DN
cissvh2	Sverdrup 2nd floor next to the elevator	Xerox ColorQube 8570DN
cisrh1	Ritter 2nd floor room 235	Xerox ColorQube 8570DN
ccstek5	CCS 2nd floor printer room	Xerox ColorQube 8570DN
ccstek6	CCS 3rd floor room 309	Xerox ColorQube 8570DN
mbrdtek1	Hubbs Hall 4th floor room 4430	Xerox Phaser 8650DN
siomb2	Mesom Building, 2nd Floor Kitchen	Xerox Phaser 8560DP

* printing is restricted to campus network, you must be connected to UCSD-PROTECTED or campus ethernet when adding printer or printing.

Instructions for Mac OS 10.8 and

...

newer
Anchor
mac_instructions
mac_instructions

In FInder, click on the Go menu -> Connect to Server
Enter smb://sioprint.ucsd.edu for Server Address and connect
When prompted to login, use your AD login (usually the first part of your email address, and your email password)
Select Printer Installers Mac, click OK
Double click on the printer which matches your building name (e.g. Hubbs will be siohubbs4; refer to printer locations and names)
You may be prompted to enter your computer's administrator password. If you are not an administrator on your computer, please contact Scripps IT Helpdesk for assistance.
Now print a test page to the printer you just added
Open System Preferences, Printers & Scanners
Select the printer you just printed to. Click Open Print Queue...
Look for the test page (it should say Hold for Authentication); Click the refresh button on the far right.
Enter your AD login, check the save password box, click OK.